Review boxing mod Joyetech eVic Primo Mini

Joyetech eVic Primo Mini  is a small 80 watt starting mode. It is equipped with one 18650 rechargeable battery with a fast charge function. The mod is combined with the new ProCore Aries atomizer, which is equipped with a easy-opening top lid and a convenient system for quickly filling up liquid. This set is suitable for novice vapers, as well as for fans of portable electronic cigarettes.

Appearance and size

The body of the box mod is made of aluminum, stainless steel and zinc alloy. On the sides there are black carbon inserts. The device is quite compact, comfortable in the hand.

The mod can be purchased in black, silver, red, yellow and blue colors.

On top there is a connector for the atomizer, which is designed for large devices with a diameter of 24-25 mm with a pin of 4-5.5 mm in depth. To attach the atomizer to the box mod 510 connector is used.

On the side is the device control panel. It has a screen, a large “Fire” button, “+” and “-” buttons, and a microUSB connector for charging.

Below are the holes for the withdrawal of gases and the battery cover.

Dimensions fashion  eVic Primo  mini:

  1. Height – 127.5 mm.
  2. Width – 39 mm.
  3. Thickness – 25 mm.
  4. Weight – 139 g.

Atomizer ProCore Aries is equipped with a 4 ml tank.

On top there is a plastic driptip in the form of a casing, which is tensioned onto the metal part with 3 sealing rings.

In the atomizer, the upper refueling function is implemented. To do this, you do not need to unscrew the top cover, just push it a little to one side and pull it up. The lid opens 2 large enough openings for refueling.

Atomizer fully understood. The glass of the tank is replaceable, so if it is damaged it can always be replaced with a new one. It is transparent, so the level of fluid in the tank is easy to control.

The evaporator is  screwed directly onto the base.

The blower is adjustable with a rotating metal ring. You can set as a tight cigarette, and light hookah tightening.

Atomizer size:

  1. Height – 52 mm.
  2. Diameter – 25 mm.
  3. Tank capacity – 4 ml.
  4. Weight – 70 g

Focus On www.ave40.com For More Vape Kits.

Equipment

eVic Primo Mini  is sold in this configuration:

  1. Boxmod itself – 1 pc.
  2. Atomizer ProCore Aries – 1 pc.
  3. Replaceable glass tank – 1 pc.
  4. Evaporator with a  resistance of 0.4 Ohm – 1 pc.
  5. Evaporator with a  resistance of 0.25 Ohm – 1 pc.
  6. Spare O-rings – 6 pcs.
  7. MicroUSB charging cable – 1 pc.
  8. Instructions – 2 pcs.
  9. Warranty – 2 pcs.
  10. Cardboard box – 1 pc.

Specifications

eVic Primo Mini  is equipped with 1 18650 battery and 80 W function board. The battery is charged with a current of 2 A. The outgoing current is 25 A.

The device works in various modes:

  1. Varivatt
  2. Bypass
  3. Start.
  4. Temperature control on nickel.
  5. Temperature control on titanium.
  6. Temperature control on stainless steel.
  7. TCR mode in 3 settings.

The minimum resistance of the device in the modes of varivatt, mehmod and start is from 0.1 to 3.5 ohms. In thermal control mode and TCR supported resistance from 0.05 to 1.5 ohms.

The mod has standard types of protection against the following problems:

  • short circuit;
  • low / high resistance;
  • low / high voltage;
  • battery recharge / recharge;
  • overheating;
  • work without an atomizer.

Main functions

The functionality of the Joyetech eVic Primo Mini boxing mod   is quite wide.

Varivatt – the main mode of soaring. In this mode, you can manually set the device power value. The maximum supported power value is 80 W, which is a good indicator for devices of this class. The minimum power is 1 W

Bypass activation activates the vape in the mech-mode. In this mode, the power of the device will directly depend on the battery charge level. The more charge there is, the more powerful the mod will be. On maintenance-free  evaporators  , this setting is undesirable.

Start mode is most suitable for beginners. When the start mode is on, the device will automatically adjust the power to the resistance value of the atomizer helix. The mod will memorize the last 10 power settings on various atomizers.

Thermal control modes on nickel, titanium and stainless steel are suitable for using  evaporators made from these materials. The range of temperatures available is + 100 … + 315 ° C or + 200 … + 600 ° F.

In TCR mode, you can pre-set the temperature settings for use in the mode selection menu. For this there are 3 memory slots.

The mod is equipped with a pre-heating function that allows you to determine the level of heating of the spiral after pressing the “Fire” button. This function is convenient to use when installed non-standard windings operating at high temperatures.

For optimal performance, it is better to use a liquid with an average concentration of glycerol (50-70%).

Using

The mod is controlled by the “Fire”, “+” and “-“ buttons. All the necessary information is displayed on the big screen. There are values ​​of power, resistance, temperature and battery charging.

The device turns on and off by pressing the “Fire” button five times.

By pressing the “Fire” button three times, the mode selection is activated. You can change them using the “+” and “-” buttons. First you select the mode you want. Then press the main “Fire” button to confirm the selection.

Pressing the “+” and “-” buttons simultaneously will lock the device. Thus, the buttons will not be pressed by themselves when the electronic cigarette is in a bag or pocket.

Pressing “Fire” and “-” activates the low power consumption mode (stealth mode). Simultaneous pressing of “Fire” and “+” will provide access to the preheat settings, as well as the appearance of the display menu.

The “+” and “-” buttons change the values ​​of power and temperature. If you hold one of them, quickly set the minimum or maximum value.

When hovering, the “Fire” button must be held down.

Advantages and disadvantages

This model has the following advantages:

  1. Compact size.
  2. Large selection of modes of operation.
  3. Powerful board.
  4. Replaceable battery.
  5. Convenient refueling technology.
  6. Stylish design.
  7. A large number of color options for fashion.
  8. Big screen.

However, it also has some minor drawbacks, for example, poor transmission of taste and lack of access to the  evaporator  when the tank is completely filled with liquid.

Primo Mini is the best combination of quality, functionality and price.

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :  Joyetech eVic Primo Mini kit with ProCore Aries atomizer

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA 

Joyetech Atopack Penguin SE Reviewed – It’s Just Not For Me

The Atopack Penguin Gets an Upgrade – So How Does it Vape?

This is the upgraded version of the original Joyetech Atopack Penguin – the ‘Special Edition’.

I didn’t get my hands on the first version but it seemed a heck of a lot of reviewers and vapers loved it.

ATOPACK_PENGUIN_SE

This is about a simple as vaping can get – you fill up the cartridge – pop on the coil – hit the fire button and vape.

There’s nothing to phase even the newest of vapers – no screens or settings – the chip will add as much power as it thinks you need depending on the coil.

Joyetech say this is both direct to lung [DTL] and mouth to lung [MTL] and comes with two coils.

Design wise it does indeed look like a cute little penguin so has it given me happy vaping feet?

Let’s take a closer look.

Inside the Box

  • 1 * Penguin SE battery
  • 1 * ATOPACK cartridge
  • 1 * ATOPACK coil (JVIC1 0.6ohm)
  • 1 * ATOPACK coil (JVIC2 0.25ohm)
  • 1 * QC USB cable
  • 1 * Quick start
  • 1 * Warranty card
  • 1 * Warning card
  • Spare parts

penguin box

Atopack Penguin SE Specs

  • Size: 26.5mm*52.0mm*102.5mm
  • Weight: 102.0g
  • Cartridge capacity: 8.8ml/2.0ml
  • Battery capacity: 2000mAh
  • Max charging current: 2A
  • Colors: white, black, light blue, light pink, purple mix, grey mix
  • Output mode: direct output
  • Features: JVIC system, visual e-liquid window, modular design concept,

atopack penguin se contents

Atopack Penguin SE Quick Start Guide

  • OK first up remove the cartridge
  • Remove silicone plug
  • Fill juice via centre hole – avoid the airflow!
  • It’s important you prime the coil before pressing it onto base
  • Leave to stand for at least 10minutes else you WILL get a dry hit as I did!
  • Vape by pressing fire button

fill penguin

Light Display

There’s no screen but you can see the level of your battery via the LED light display.
5 solid lights means battery is full and these will go out one at a time as your battery fades.

lights

Focus On www.urvapin.com For More Vape Start Kit.

Key Features

This is kind of a cross between a pod mod and an AIO [all in one device] – with the key feature being its total simplicity and I guess cool looks – yes it does look like a penguin particularly in the white and black version – very cute.

The refillable tank or cartridge has a TPD busting 8.8ml e-liquid capacity or if you’re in Europe a 2ml version is available – there’s space to write your e-liquid and other info on the side for future reference.

cartridge

Charging is super-fast – from flat to fully charged I timed it to be a little under 2 hours and vaping on the 0.25ohm coil I got 6 hours before the battery ran down and slightly longer with the 0.6ohm coil.

penguin coils

Joyetech say the JVIC coils are ‘kanthal with pure cotton wrapped in a ceramic cradle’ and promise ‘It takes a horizontal approach in discovering original and clear flavor as well as large clouds’ – more on that later.

The new Special Edition comes in a variety of colourful options: white – light blue – grey mix – purple mix – light pink and the plain black I received.

Design and Build Quality

Design wise the Joyetech Atopack Penguin SE is obviously modelled on a penguin and that’s either going to appeal to you or not – personally I like the looks.

Build wise everything is well put together and it feels like zinc alloy or at least a very light and tough material with a very good paint job.

atopack penguin se in hand

I haven’t used the original Penguin but I’m sure I read somewhere there wasn’t a juice window – the newer version has one and it’s shaped like an eye – a nice touch!

There’s no moving parts as such but pulling out and replacing the cartridge is easy enough and you get the minimal of rattling when it’s all put together.

It can get a little slippy from your finger oils so be careful as whilst it’s a tough little cookie – I don’t think it could handle too many falls on a hard surface.

How Does the Joyetech Atopack Penguin SE Perform?

First up you might be a little stumped on how the Joyetech Atopack Penguin works – the instruction manual is a little vague.

And hey I’m not the only reviewer who had to think about what to do in the first few minutes trust me!

atpocack penguin se

OK, once you’ve removed the silicone cover from the base of the cartridge filling is a doddle – but you MUST prime the coil and once in place let it sit for a good 10minutes or longer.

I began with the 0.25ohm coil and left it for the allotted time – but got an awful dry hit – I mean awful.

Looking at the photo I took of the 0.25ohm coil – there does appear to be some damage – not sure if that’s the reason for the dry-hit but trust me even an hour later it was still doing it!

I swapped it for the 0.6ohm coil and left it for half an hour after priming and whilst there was no dry hit the flavour was more than a little muted.

It was only a good 30minutes later the flavour came through and the vapour production surprised me somewhat – lots of it!

Joyetech say the 0.6ohm coil is best for MTL but for me it wasn’t restricted enough but did give a half decent to lung, sub ohm vape.

As I’ve said clouds were very good indeed however it did take my coils ¾ of a tank before I got the best out of them.

atopack seThe none adjustable airflow is just above the fire button and depending on which way you vape you can block it with your hand or lip which is a bit annoying.

Despite all that I have to say vaping on the Atopack Penguin SE is fun with a half decent flavour and plenty of clouds.

What I Like

Once you get past those first few moments wondering how it all fits together it really is a joy to vape on.

I’m not that excited by the flavour though – whilst it’s OK it’s not superb – but the vapour production is excellent.

It is extremely simple to use and over 8mls capacity and a reasonably long battery life means this is ideal for days out – it’s definitely not a juice guzzler.

And once those coils are broken in and soaked to the core they taste as if they’ll last an age – I’m into the 16th day and the taste is still clean – they wick well too even when chain vaping.

What I Don’t Like

There’s not a lot I don’t like – it is what it is a half decent fun vaping kit.

Not so sure it is a true MTL vape though I guess you could add a little tape to block of some of the airflow.

Speaking of the airflow it can get blocked off by your chin of hand if you’re not careful – not an issue if you vape with it pointing away from you.

Final Review Verdict

Having not used the original I can’t compare the two but as a standalone I think the Joyetech Atopack Penguin SE is a quirky cute fun little kit to vape on.

Look you’re not going to win any cloud chasing competitions even though the vapour is surprisingly good.

And flavour wise it isn’t bad but neither is it that good – especially the first half of the 8mls!

I was definitely interested in buying the Atopack Penguin but if I’m honest I’d have been a little disappointed.

That’s not to say I would put you off buying on as a spare or back-up – it’s just not for me.

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available : Joyetech ATOPACK PENGUIN SE

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA 

Joyetech Exceed D19 Vape Pen Review

When it comes to vape pens, Joyetech just loves the concept of the all-in-one. That’s a great selling point because vaping beginners don’t want to get much into electricity science, they simply want to know what the good vaping is all about. But, at the same time, in most of the AIO vapes, you literally can’t change something you don’t like. You just have to use what they give you in the kit – no more, no less. Joyetech figured that it was time for some revolution in entry-level devices and released the Exceed D19 vape pen with two coil heads, adjustable airflow, and 510 connector. Boom!

Getting To Know the Joyetech Exceed D19

Joyetech Exceed D19 build

As for design, you won’t find anything outstanding here. Joyetech keeps on producing typical tube mods with a sleek, seamless look that represents an all-in-one concept. The range of mod colors is pretty basic – there’s a shiny, brushed stainless steel, black, white, dark orange, black-and-white gradient color options. I like that the unit is made of metal, instead of cheap plastic. And thanks to its size, you can literally hide the whole vape pen in the palm of your hand.

The Kit, as I already mentioned before, packs something more than a typical AIO vape pen. Let’s check it out.

The Little Joyetech Exceed D19 Box Includes
  • The Exceed D19 Mod Itself
  • Exceed D19 Tank With 510 Connector
  • 0.5 Ohm Coil Head (Direct-Lung Hits)
  • 1.2 Ohm Coil Head (Mouth-to-Lung Hits)
  • User Manual
  • Charging USB Cable
  • Warranty Card
  • Warnings Card
  • Spare O-Rings
  • Spare Tank Glass

I liked the fact that they give a choice of the vaping styles, meanwhile providing simplicity of the vape pen build. The Exceed D19 has two operating modes and only one button! You can see what mode you’re currently using with the help of an LED indicator ring underneath the tank. On the bottom of the device, you can see a venting hole for the battery, which ensures it won’t overheat. They also included a small chipset inside to protect the unit from overcharging (and exploding), over discharging, and overcurrent.

Joyetech Exceed D19 colors

Focus On www.ave40.com For More Vape Kits.

The Exceed D19 tank can contain 2 ml of an e-juice. Thanks to the medium holes in a coil head your e-liquid won’t run out too fast, meanwhile bringing more than satisfying vaping experience.

The firing button is nice and big enough. It protrudes a little bit of the surface. Along with the rubbery and durable coating, it feels quite clicky and easy to operate. There’s a USB port on the other side near the button. In my opinion, it would be more convenient to place it in the lower part of the mod, making sure that it won’t accidentally fall when charging.

The airflow valves have a unique design that I’ve never seen before. From one side they placed a steel lid with three holes, and on the other side of the circle, there’s an open lid, which you can turn and close to the preferred level. The holes section is designed for MTL vaping, and the more opened one – for the DL. Although, nothing can stop you from experimenting with those two. I’ve tried, and you can see what happened a section below.

How To Customize the Exceed D19

One of the main selling points of the Exceed D19 is the ability to swap two slightly different operating modes. What you can change is a voltage level and thus, have a more or less powerful vapor production. So, the options that you get:

  • constant voltage (orange light) fires up at the maximum voltage output, whenever you take a draw. When the battery discharges, your vape pen will suddenly turn off.
  • direct output (white light) functions as a typical mech mod; the voltage goes higher or lower according to the level of battery charge.

When the indicator LED ring starts to flash it means that the battery is slowly discharging. The faster it blinks – the more it is discharged.

Here are some other exciting features of the Exceed D19
  • 19 mm Width
  • 118 mm Height
  • 1500 mAh Battery
  • 73 g Weight
  • NiCr Coils
  • Coil Heads Compatible: EX Series
  • Up to 40 W Output (Full Charge in Direct Output) 0.2-3.5 Ohm Coil Resistance Limits

The pre-installed Exceed D19 tank has a top-filling system. With a special, donut-like holes, the e-juice refilling becomes the easiest thing to do. The drip tip screws on and unscrews easily. Although, it was a little disappointment for me that it was made of plastic. Good news is that I didn’t notice any leaking whatsoever. I walked around with an Exceed D19 in my pocket, in my bag, it was lying on its side on the table. No leaking at all!

It’s Time to Vape the Exceed D19

Joyetech Exceed D19 small size

I decided to start with a mouth-to-lung coil, which is designed with a 1.2 Ohm resistance. According to the official website of Joyetech, it works with an 8-14 wattage level and is best at 12W. I first thought it was a little bit too low for me, as I am used to much higher wattage settings. So I set the direct output mode to not overheat the coil and get the best of its capabilities.

So, on this mode, I didn’t get huge plumes of vapor. The draw was quite restricted, much like a cigarette draw. I liked that because of the throat hit it delivered. And the flavor was pretty fine, but not warm enough, to my taste. I think this coil is a good option for ex-smokers, certainly the ideal one for nicotine e-liquids best performance.

On the other side, you have a chance to try not the ex-smokers world, but a vaper’s world. This is a whole new territory for someone who’s been familiar with smoking for quite a bit of time. This is a different experience. When I put the DL 0.5 Ohm coil inside the Exceed tank, I didn’t expect much, to be honest. There are a lot of advanced vaping devices on the market, and usually, entry-level vape pens can’t compete with those. I switched to constant voltage mode and took a nice, very very long drag, inhaling it right into my lungs.

I must admit, that the draw was effortless, but still, just a little bit restricted to the acceptable point, making it easy to inhale loads of vapor. With a too wide mouthpiece and too airy draw of the SMOK Stick V8, for example, I couldn’t inhale a lot. And the vapor cloud was seriously huge. I was pleasantly surprised with the amount of vapor. As for the taste, I found it tasty enough, but less than it was in an MTL hit. Probably, that was because the vapor passed all the taste buds in my mouth on its direct way to the lungs.

What’s the Competition

I already wrote about the SMOK Stick V8 up top, and there are also a few interesting details to mention. The V8 has a 3000 mAh battery, comparing to 1500 mAh of the Exceed. Meanwhile, the Exceed is smaller and stealthier. The Smok Stick V8 has all those fancy rainbow chromatic styles, which is less boring than the black-and-white world of the Joyetech. But given all that, I admire the Exceed D19 customization abilities more.

What Exceeds
  • Two coil heads for DL and MTL
  • Quality stainless steel build
  • Advanced battery protection
  • Easy operating
  • No leaking
  • Small size
  • Durable battery
  • Huge vapor
  • Great taste
What Doesn’t Exceed
  • Plastic drip tip with plastic threading
  • Little vapor production in the MTL mode

Do We Recommend It?

The Joyetech Exceed D19 is a bargain for someone who wants to start his vaping journey and try different vaping models. You buy one simple device, and you get much more than just a traditional AIO vape pen. You can instantaneously choose between small, intense hits and long, smooth ones. Even though, to do this, you’ll have to vape down all your e-juice left in the tank. The build is durable and smart. And all that beauty sells for nearly $30, which I think is awesome.

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :   Joyetech Exceed D19 Starter Kit

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA