Frankly, I longed for this meeting, so to speak, I was looking for her. I have a special passion for single-stranded taste drips, and today my guest is a bright representative of this “class,” namely, the class is a special caste, you know? Yes, okay – just kidding, however, in every joke there is some joke …
Vapefly Pixie RDA
Case material: stainless steel Atomizer
Height: 24.5mm with Drip type / 18mm without Drip type
Connector: 510, pin gold-plated
Color: see photo below
– Pixie RDA
– 2pcs pre-wound spiral Ni80 0.35Ω
– cotton- “string” 2pcs
– replaceable blow-out nozzle 2pcs (one is preinstalled)
key – key-screwdriver
– spare eringing
– spare screws
– skvonk pin
– user manual
I can not but say about the packaging – I always praised the guys from Vapefly. The box has everything to launch the novelty immediately after unpacking. Bravo – all manufacturers to take as an example.
I liked the exterior of the dripka even at the first photo – neat, not “defiled” by the excessive decor, except that the inscription on the side somewhat dilutes the strict, but smooth, appearance. In the upper part, our hero has a gradual narrowing, several radiators, and a rather organic drip type. In short, you already understood what I liked. I summarize this way – the appearance is modest but attractive.
Dimensions are very small – it is literally a thimble. This can be attributed to both advantages and disadvantages. This is because on most mods such a thing looks small, you will need to carefully select a “partner” for it.
Drip type is made of dolrin, landing 510th. The inner diameter is 7mm, at the base, there is a slight narrowing. This friend copes with condensate at times, I quite liked him in his work. Moreover, its height is sufficient for comfortable soaring, but more on that later.
Next on the list is the top cap, it is already made of metal, and quite thin. The ensemble is crowned with a radiator made of plastic, it seems to be fixed, but the drip type sits in its metal part. Internal processing is like spherical, however, such it is not the entire length of the tip of the dome, but only around the mine. Plus, there is a slight elevation closer to the center, in order to prevent unwanted leakage of liquid or condensate to the outside when turning the drip – cool.
At the base, there are two openings for air intake. One oblong, 8 x 2 mm in size. The second has a rounded profile, its diameter is 2.5mm. Kept top cap on one orange, its density is excellent – the most it. Adjusting the air supply is achieved by rotating the top cap relative to the side skirt, risks are provided for convenience.
The side skirt does not sit still without the deck, thanks to the keys, although, admittedly, a small “play” (left and right) takes place. In the appropriate place can be seen as a hole for the side blowing, into which interchangeable nozzles will be inserted.
Focus On www.ave40.com For More Vape Tank.
One of them is completely open, and the other is divided into three holes with a diameter of about 1.8 mm. The nozzles sit in principle tightly, but still, I would advise to being more careful with them. They are also removed without any problems – the developers even provided a recess on the inside of the side skirt for convenience. Inside the drip, the nozzle cannot fail – there are special keys. Made of plastic inserts, like the material from which the insulators are sculpted.
These blowers direct the air at an angle to the deck, the angle is probably almost 45 degrees. Plus, the exit holes are close to the intended helix due to the thickening of the side of the skirt.
The delay turned out to be tight, but looking ahead, I would say that apparently, this is one of the moments that has a positive effect on the taste. With a wide nozzle, it becomes a little easier, but in general, it still remains tight. However, most single-stranded specimens have about the same tightness.
At the round hole, the puff becomes quite taut, but it does not add taste, but the drip begins to warm up stronger. In this case, it is difficult to pull directly into the lungs, but this is definitely not mtl. In short, why this was done, I especially do not understand.
I’m content with a fully open three-nozzle – as for me, it’s almost Zen, because I love relatively tight puffs on all types of atomizers.
Deca me, frankly, pleased.
It is simple and convenient. On it are two racks for fixing one spiral. The clamping plane is correct – there will be no coil deformation. Hexagon screws, spare ones are the same – zero complaints. The holes in the racks are about 3 x 2 mm in size, the distance between their centers is about 8 mm. Here you can stick, both small and relatively large specimens of coils, of course, you should take into account the width of the air inlets.
For the test, I used the complete fusion. He is far from fat, and here with him drip when hovering heats up moderately. And even if you steam without a break. Frankly, I was even a little surprised – the heating is “minimal”, the steam is of a comfortable (average) temperature. The dome absolutely does not burn the lips. Of course, I think if you stick a fusic fatter (at least three-core), then the heating will be felt. On the other hand, why in such a baby is such a “porn”, because it works great on “simple weaving.”
About laying cotton wool and say it is not necessary – 5 seconds. Total service will take you a minimum (very minimum) of time and nerves – and again the excellent work of the developers.
Visually, it seems that there is no bath. However, it can be filled above the edges, just so I measured. Approximately 1.8 mm fit into the air duct. Moreover, it will be “difficult” to achieve overflow – you are also protected by the angle of inclination of the air passage channels, plus the diameter of the holes in the three-hole nozzle does not allow liquid to penetrate into them – almost not spilling)
. And you can fill directly through the drip type. Checked – incomplete refueling is enough for about 5-6 decent puffs.
In addition, the box has a Squonk pin, its outlet opening rises above the bottom of the deck. Therefore, it will not be able to collect the surplus (liquid not soaked in cotton), thereby ensuring its small supply at the bottom of the deck. I like this solution more than “complete suction”. Since in small drips, the slurry ends quickly.
I also want to return to the service. On the sides of the deck, there are grooves that seem to indicate the ideal location of the coil relative to the blower. So I neglected this information and raised the spiral higher. For, looking at the spiral through the airflow, I realized that in the proposed embodiment, the air would pound precisely into the center of the spiral and a little into its upper part.
By the way, a small “hemorrhoid” causes the adjustment of the spiral, because you will need to wear a side skirt every time for aiming. However, I will not call this moment critical, even this seemed interesting to me.
It remains to tell about the taste transfer. As for me, she is excellent, very worthy. Moreover, by no means, all of the double-wired colleagues in the workshop can boast. Steam is quite saturated, it is well decomposed into ingredients.
Excessive sweetness is not in sight, yet blowing side. The only caveat is that a little (just a little) lacks just the taste itself, but this is in comparison again with double wings, which in itself is not correct. I repeat – for one-coiled drip, it is very worthy taste, very.
Both pins are gilded and perform well.
Impressions of use
I am very pleased with my rookie. The workmanship on the top five, the appearance is modest and neat, the dimensions are tiny. The service is a superfluous and quite pleasant thing, and the taste transfer deported my former favorites in this segment back to their boxes. Naturally, I also could not help but bribe the price tag, and such equipment in addition.
I can confidently recommend this copy to all lovers of single-bells. For such a price, you can simply hook it up for change when you buy a box or a squonk mod. However, without regard to the price tag, I would not change my recommendations.